The ChinSurfers Ledges in the Full Cage Kits:
4 - 3.75-inch round ledge
1 - 6-inch wide ledge
1 - 8-inch wide ledge
1 - 12-inch wide ledge
1 - 12-inch Diamond Corner ledge
1 - 9-1/2-inch Triangle Corner ledge
PLUS Choose an option below to add to these ledges:
Option 1: Hideout and 15" Bridge:
Ledges listed above PLUS:
1 - Hanging Hideout 10" W x 8" H x 10" L with Front ledge 2-3/4" L x 10" W.
1 - 15" Bridge Hanging Tunnel w/3x5 Ledge this item is approximately 15" from one side to the other, 5-1/2" from front to back and 8" from top to bottom.
Option 2: Hideout and Two 15" Bridges:
Ledges listed above PLUS:
1 - Hanging Hideout 10" W x 8" H x 10" L with Front ledge 2-3/4" L x 10" W.
2 - 15" Bridge Hanging Tunnel w/3x5 Ledge this item is approximately 15" from one side to the other, 5-1/2" from front to back and 8" from top to bottom.
Option 3: Hideout, Hay Feeder and 15" Bridge (Pictured):
Ledges listed above PLUS:
1 - Hanging Hideout 10" W x 8" H x 10" L with Front ledge 2-3/4" L x 10" W.
1 - 15" Bridge Hanging Tunnel w/3x5 Ledge this item is approximately 15" from one side to the other, 5-1/2" from front to back and 8" from top to bottom.
1 - Hanging Hay Feeder this item is approximately 10" W x 5" H x 7" L from front to back including the 3" ledge
Option 4: Hideout, Hay Feeder and Two 15" Bridges:
Ledges listed above PLUS:
1 - Hanging Hideout 10" W x 8" H x 10" L with Front ledge 2-3/4" L x 10" W.
2 - 15" Bridge Hanging Tunnel w/3x5 Ledge this item is approximately 15" from one side to the other, 5-1/2" from front to back and 8" from top to bottom.
1 - Hanging Hay Feeder this item is approximately 10" W x 5" H x 7" L from front to back including the 3" ledge
More about the Hanging Hideout:
Front and right side opening are over 4" large
Left side is open for E-Z Cleaning Access.
This Hanging Hidey House can be mounted on the side or back of the cage with included installed hardware within minutes!
More about the Hanging Hay Feeder:
This item is approximately 10" W x 5" H x 7" L from front to back including the 3" ledge
Two Chinchilla 3" face cut outs in the front for feeding
3" Ledge for your Chinchilla to sit and enjoy their meals!
2 hanger bolts on the back to mount to cage.
Hardware; hanger bolts installed, 1 1/4" wing nuts and washers included.
More about the 15" Bridge:
This item approximately 15" from one side to the other, 5-1/2" from front to back and 8" from top to bottom.
Hang this anywhere with the side mounting hardware installed.
Features a cute Chinchilla face cut out and a 3"x5" ledge built in.
Larger cage set up? If you wanted another set of ledges we have that option for you too.
All 4", 6", 8", 10" wide ledges are 6" in length.
Diamond corner ledge with poop guards is 8-1/2" sides x 8" back to front and 12" from corner to corner.
Triangle corner ledge with poop guards is 6 1/2" sides x 5-3/8" back to front and 9-1/2" from corner to corner.
Round ledges are 3.75" diameter.
Kiln Dried Pine professionally handcrafted and safe.
Poop guards built in to the ledges!
Hardware included; hanger bolts installed, 1 1/4" wing nuts and washers included.
100% Satisfaction Guaranteed!
100% Hand Made!
100% Safe!
All products are handmade right here in New Jersey from kiln-dried pine, sanded down until smooth and safe.
*Handmade products may have slight differences.